Antigravity Clampless Starting Harness for Micro-Start XP-1 & XP-10 Gen 2 (20")

Jump start your motorcycle without ever touching the battery. The Antigravity Clampless Starting Harness installs on your bike's battery once and gives your 2nd generation Micro-Start XP-1 or XP-10 a direct plug-in connection, so there's no digging out the clamps, no pulling the seat and no removing side covers when the battery dies.

The ring terminals connect straight to your battery, and the other end tucks away in an easy-to-reach spot under the seat or along the frame. When you need a jump or just need to energize the bike, plug the Micro-Start into the harness and go. It only takes a few minutes to install, and a dust cap protects the connector when it's not in use.

Key Features

• No clamps needed: plugs straight into the Micro-Start's jump start port.
• No seat removal: route the connector to an accessible spot on the bike.
• 20-inch length: the right size for motorcycles.
• Ring terminals connect directly to your battery.
• Dust cap included to keep the connector clean.

Fits: Antigravity Micro-Start XP-1 (Gen 2) and XP-10 (Gen 2) only. Gen 2 Micro-Starts have a digital readout and use a different connector, so this harness does not fit the original XP-1, XP-3, XP-5, XP-10, XP-10-HD or Sport models, or the XP-20 series.

Please note: the jump start port is for jump starting only. Unplug the Micro-Start once the bike is running, don't leave it connected to the battery, and never try to charge the Micro-Start from your bike's battery through this harness.

Works with these jump starters we carry:

• Antigravity Micro-Start XP-1 (Gen 2)
• Antigravity Micro-Start XP-10 (Gen 2)

Have an XP-20 or XP-20-HD? Use the XP-20 Clampless Starting Harness instead.

Part Numbers:
Manufacturer: AG-MSA-10D
P/N: antAG-MSA-10D