XMC LED Headlight
The XMC Headlight was engineered to deliver optimal road coverage. With additional LEDs that fill in the space between the vehicle and the peak of the beam, the XMC Headlight makes riding a safer experience for everyone on the road. Halo ring is integrated and the light is backed by a lifetime warranty!
DOT Certified Driving Light
Take your Vision X XMC LED Headlight anywhere without worrying. Every part of the headlight has been approved and certified by the DOT in all states.
Perfect For Any Bike
The XMC 7″ LED Headlight is the perfect accessory for any bike with a 7″ round headlight housing. With outstanding performance, you’ll turn heads and shine brighter at the same time. Available in Polished Chrome or Black Chrome finishes, these LED Headlights are the perfect touch to personalize your bike.
XMC LED Passing Lamps:
The XMC 4.5″ LED Passing Lamp Halo Series from Vision X features an immensely bright LED Halo around the outer edge of the Reflector. With a separate wire, you’ll be able to rig the Halo up as a daytime running light, additional indicator lighting, or anything else you can imagine.
Vision X Lighting’s XMC 4.5″ Passing Light Gain extra visibility and enhance your safety on the road with the addition of a set of 4.5″ XMC 10-Watt LED Passing Lamps. These powerful lights each pack five times more output than the stock passing lamps, and draw six times less amperage. Dramatically improve your performance while increasing visibility and safety. The MSR Style Reflectors give the XMC Passing Lights a powerful beam pattern than combines distance with full spread coverage. Includes lifetime warranty!
Required Adapters Sold Separately (see videos below for assistance)
- Choose all items you need prior to checkout
XMC 7"
- 1996-up Harley-Davidson Touring models and other motorcycles with 7" headlight.
- Notes-
- We recommend you check your current connection behind your headlight if you are unsure. Fitment described below is typical, but not absolute.
- 2014-up Harley-Davidson Electra Glide, Street Glide, Limited, Ultra, Ultra Classic & Tri-Glide models with a single bulb halogen headlight require the Delphi flat 4 to H4 adapter part# 45010. Harley models with a dual-beam (bulb) halogen headlight require a dual-beam adapter part# 45011. (See video below-time 5:56)
- 2014-up Road King requires the 45011 H4-H9 Dual Beam Adapter
XMC 5.75"
- Fits most 5.75" headlights in motorcycles, cars, trucks, etc.
XMC Passing Lamps
High Four All On Low/High Beam Adapter: (allows for low/high beam to be on at the same time)-Not Required-Additional
- Dual Beam headlight wiring adapter. “High Four” All On Adapter is designed to accompany the Vision X headlight. The 45012 allows the high and low beams to shine at the same time.
- Pre-2014 models need the #45012 to have both high and low beam on when high beam switch is on.
- Not needed on 2014-up Touring models with factory equipped standard H4 halogen headlight.
White Halo Wire-Connection Information:
The white wire should be wired to a switched 12V power source in the fairing. There are two possibilities.
- Splice the white wire from the headlight to the blue wire on the dual-beam adapter.
- In the harness going to the original headlight plug, you should find an orange wire with a white stripe. It will have a spade connector on the end. Crimp a connector on the white wire and plug it into the orange/white wire.
