Ciro-Vision X XMC LED Headlight (7" & 5.75")-Touring & Non-Touring Models

  • 42500

Note: If converting from a stock Harley-Davidson 2 plug halogen headlight you'll need the correct Headlight Wiring Adapter for your bike to convert to LED. These adapters do not come with Vision X Headlight (sold separately). Please check your application and compare to the adapters listed below.  We recommend you remove your stock headlight and look at the connection before ordering. Any suggestions below are based on stock lights & we recommend you confirm the adapter needed before ordering. See install video below-time 5:56.
FITMENT INFO: (use drop down menu above near the price to select the correct headlight and the price will adjust)
  • VISION X XMC 7" HEADLIGHT fits 1996-up Harley-Davidson Touring models and other motorcycles with 7" headlight.
  • XMC LED ROAD GLIDE HEADLIGHTS fits '99-'13 Road Glides
  • VISION X 5.75" HEADLIGHT fits most 5.75" headlights in motorcycles, cars, truck, etc.
Choose your appropriate wiring adapter (NOT INCLUDED): (click on adapter you need)-SEE VIDEO BELOW ON THIS PAGE W/ ALL WIRING ADAPTER INFORMATION!

#45010-Lighting adapter to convert Delphi flat 4 to H4 adapter. Fits most 2014 & newer Harley Street Glides see video below-time 5:56). This connects to the stock Harley Delphi which is about 6" back from the stock light connection.

2014-up Harley-Davidson Electra Glide, Street Glide, Limited, Ultra, Ultra Classic & Tri-Glide models require part# 45010, XMC-H42DELPHI Delphi flat 4 to H4 adapter for installation if replacing the Stock Harley LED. If you have a Dual Halogen stock headlight which is often an upgrade see below.

2014-up Road King requires the 45011 H4-H9 Dual Beam Adapter. Or Street Glides, Ultras that have upgraded to the HD Disl Halogen headlight. Again we recommend you check your application before ordering. 

#45011 - Lighting adapter for Dual Halogen to LED. 2014 and newer Harley Road King & Electra Glide Classic & Ultra Models. 

Additional Adapter (not required)

#45012 "High Four" all on adapter and is designed to accompany the Vision X LED Headlight.  This allows the high and low beams to shine simultaneously. This is not needed on 2014 & Up Street Glides. 

 Note: Adapter not needed for 2013 and older models, but if you want the hi-low to be on at the same time in high beam use 45012. 

**Wiring adapters do not come with Vision X Headlight (sold separately).

INFO on how to connect the WHITE HALO WIRE:

The white wire should be wired to a switched 12V power source in the fairing. There are two possibilities. 

1: Splice the white wire from the headlight to the blue wire on the dual beam adapter.

 2: In the harness going to the original headlight plug you should find an orange wire with a white stripe. It will have a spade connector on the end. Crimp on a connector on the white wire and plug into the orange/white wire. 

Light the night with this super bright and durable LED headlight from Vision X. Glow ring is integrated and the light is backed by a lifetime warranty!


Headlights for 7", 5.75".  LED Passing Lamps too! 

Free standard shipping on all orders $75 & up!




Customer Reviews

Based on 1 review Write a review

We Also Recommend