Description:

• Charge your phone, GPS, camera or tablet on your motorcycle
• Built in protection turns off USB charging and prevents your parked vehicle's battery from draining - starts back up when vehicle engine fires up
• Weatherproof USB charge port easily zip-tie to handlebar, strut or even brake/clutch cable - seals against inserted USB cable for charging in any weather
• Connects to battery lead with industry standard SAE 2-pin connector - in-line seal makes 12 V connection weatherproof
• Monitors and displays parked vehicle's battery status - indicates batter is 'ready to start' at the blink of an LED
• Charge current adapts to connected device for safe recharging
• AGM & Lithium batteries

Other:

LENGTH: 60" / 150cm

CHARGE CONNECTOR (INPUT): 2-pin SAE

POWER (INPUT): Vehicle 12V system with 12V lead-acid or 12.8V lithium battery.

CHARGE CONNECTOR (OUTPUT): 1x USB

POWER (OUTPUT): 3300mA @ 5V

OPERATION:  fully automatic

• Vehicle battery protection: Low input (<12.4V) auto-off protects vehicle battery from total discharge. Supply range: 12.4 to 16Vdc.
• Turns on if vehicle battery voltage increases above 13.3V.
• 2 LED battery monitor
• Short circuit, overheat, over-voltage protection.

OPERATION (Voltage)

• USB ON - 13.3V to 18V – unlimited USB output, USB LED on. Delivers USB power when vehicle engine is charging battery.
• USB 1 HOUR - 12.4V to 13.3V – 1 hour USB output, USB LED on. Go to standby mode after 1 hour or voltage < 12.4V.
• STANDBY MODE – Monitoring voltage, turns back on if vehicle battery voltage increases above 13.3V.
• AGM / LFP MONITOR - LED blink every 5 seconds if battery charge ≥ 50% , sufficient to start vehicle engine.
  • LED LFP: 13.1V to 13.3V.
  • LED AGM: 12.4V to 13.1V.
  • NO LED < 12.4V.
• OFF ≤ 9V

Part Numbers:
Part #: 3807-0477
Manufacturer # O-108KIT